The Spark R&D Flat Splitboard Pucks have channel-like stance adjustability for splitboards built with inserts. This breakthrough in design has riders beyond stoked and has made Spark R&D Flat Splitboard Pucks their most popular splitboard accessory. The Spark R&D Flat Splitboard Pucks are ideal for riders with channel binding inserts on their splitboard.

Specifications

Weight: 1.19oz/pr (289g)

Features

• Aluminum Disks: Oversize aluminum center disk overlaps binding channels for maximum strength and rigidity.
• Adjustability:
  +/- 1/4 inch (6.5mm) of toe/heel adjustment in .5 inch (1.3mm) increments.
  +/- 3 angle adjustments in 3 increments.
• Stance width adjustments in .17 inch (4.2mm) increments.
• Superior Materials: Bindings slide on soft nylon for effortless installation.

Compatibility

Compatible with all splitboards using the industry standard splitboard insert pattern. For use with all puck compatible splitboard bindings (with the exception of the K2 Kwicker)

Not Compatible with channel style splitboards or DIY splitboards (without the industry standard splitboard insert pattern).

Please note: Spark Puck screws are not compatible with Spark Canted Pucks.

Video

The Spark R&D Canted Splitboard Pucks has all the same great features of oregular Spark Pucks, but with 3 canting for reduced knee strain. It has near infinite adjustability for splitboards with inserts and the Spark R&D Canted Splitboard Pucks has quick mounting with super fine foot placement, angle, and toe/heel centering adjustments.

Specifications

Weight: 11.36 oz/pr (322g)

Features

• 3 Canting: With 3 of canting to reduce strain, your knees will thank you.
• Oversize Disk: Center disk overlaps binding channels for maximum strength and rigidity.
• Adjustability: near infinite adjustability, for your perfect stance placement.
  +/- 1/4 inch (6.5mm) of toe/heel adjustment in .5 inch (1.3mm) increments.
  +/- 3 angle adjustments in 3 increments.
• Stance width adjustments: .17 inch (4.2mm) increments.
• Superior Materials: Bindings slide on soft nylon for effortless installation.

The Spark R&D Mens Surge Bindings are designed for aggressive, larger, or super chargy riders who live for big lines. The stiffer profile sacrifices feel in favour of high speed control. Spark R&D Mens Surge Bindings have your back--from deep pow lines to spring melt freeze. Surge Bindings handle it all like a boss.

Specifications

Weight:1.49lbs/ea (676g) - 2.98lbs/pr (1352g) - Medium

Features

• Pillow Line Straps:Surge Pillow Line Straps are lightweight - 53% lighter than their fabric strap predecessors.
• Rip 'N' Flip Highback:The R&D Rip 'N' Flip shines with a shape built from 3D scans of popular splitboard boot models, and a list of rad features designed specifically for and fully appreciated by the splitboarder.
• Whammy Bar Climbing Wire:
A single fatty climbing wire is built into the baseplate with a side arm lever for easy position changes on the steeps. You can switch easily from stowed, to low (12 ), to high (18 ) and back again while touring.
• Snap Ramps & Side-Lock Tesla Touring Brackets:T1 System bindings slide sideways into the offset touring bracket and are locked into place with our snap ramp. No pins, no cables, no fiddle factor.

Sizing

Video

The Voile Canted Puck Package includes 4 canted pucks, 4 puck gaskets, 2 in-line slot discs (with support posts), 2 parallel slot discs (with support posts), 8-M6x1.7mm pan head screws, and a puck alignment guide.

This Voile Canted Puck Package allows the rider to relax their stance by bringing their knees inward toward each other, which promotes better alignment through the ankles, knees, and hips. This results in a more powerful and balanced position on top of the board.

Spark R&D Women's Arc bindings are designed with all the same features of the standard Arc but will accommodate down to a size 5 US (22 Mondo) boot. The Spark R&D Womens Arc Bindings have lower and more compact heel loops, pushing the ankle strap mounting point to the sweet spot over your boot.

In the Box: Bindings, Tesla touring brackets, T1 heel rests, mounting screws, and Spark pocket tool.

What else do I need? A set of Spark Pucks, Spark Canted Pucks, or Voile pucks.

Specifications

Weight: 1.34lb/ea (606g) - 2.67lb/pr (1212g) - XS/S

Sizing

Video