This medium size sponge works to remove that unwanted pool of water that manages to collect under your kayak spray skirt. The Boat Sponge can absorb up to 36 ounces (1.1 liters) of water at a time. Paddling in whitewater or the sea, this sponge will lift out sand and moisture from the bottom of your boat that traditional bilge pumps leave behind. It can be used with a bilge pump or on its own to keep your boat dry and clean.
8.75"L x 4.5"W x 2.75" thick
|Dimensions:||22 cm L x 11 cm W at widest point x 7 cm thick|
Born on the river, ready for whatever. First sold in 1978 as a better way to tie down gear and frames on whitewater rafts, the NRS 1" Heavy Duty Strap is known the world over for its incredible strength and versatility. The ultimate DIY tie-down solution, every boater, outdoorsperson and homeowner should own an assortment of sizes.
Share your inventive uses for NRS Straps using the #straphacks hashtag!
|Minimum Breaking Strength (MBS):||680 kg|
|Working Load Limit (WLL):||227 kg|
Aquaseal FD Flexible Durable Repair Adhesive is ideal for repairing holes and tears in dry bags, wetsuits, paddling apparel and latex gaskets. Waterproofs, seals and protects against abrasion.
Clifton Urethane Adhesive Excellent one-part contact adhesive for PVC and urethane. The 4 oz. size comes with brush applicator built into the lid.
4 ounces should cover 1 - 1.5 sq. ft. of patch (both surfaces), with 2 thin coats.
Shelf life: 1 year
Replacement latex wrist gaskets for your drysuit or drytop. These come in small, medium and large. If you are replacing the gaskets yourself you will also need aquaseal adhesive.
Replacement latex neck gaskets for your drysuit or drytop. These come in small, medium and large. If you are replacing your own you will also need aquaseal adhesive.
Clifton Hypalon Adhesive is your best choice for unsurpassed adhesion. We use it when building our Pennel Orca boats and highly recommend it. For an even stronger bond and faster cure time, mix with Clifton Hypalon Accelerator, Item # 38702.01. Accelerator ratio: 0.8 oz. to 1 gal. glue.
3.5 ounces should cover 1-sq. ft. of patch (both surfaces), with 3 thin coats.
Look for plastic mixing cups at paint or hardware stores. They have volume markings that let you measure the right amount of glue. You can also do a web search for "graduated plastic mixing cups."
We use Clifton Hypalon Adhesive to bond Hypalon to Hypalon, but this adhesive may also be used to bond other synthetic rubber materials, like neoprene and EDPM.
Shelf life: 1 year